Welcome to our piece on the top 5 automation mistakes in print production. We’ll show you how to steer clear of these errors. Print production is vital for any business. Automation makes this part much smoother. But knowing common automation mistakes is key. This knowledge helps in preventing issues, leading to better print production. Let’s explore these top mistakes and how to dodge them.
Mistake 1: Wrong Color Mode
Printing with the wrong color mode is a common mistake. For instance, using RGB instead of CMYK might make colors look off or faded in the final print.
CMYK (Cyan, Magenta, Yellow, Key) is meant for print. And, RGB (Red, Green, Blue) is for screens and devices. CMYK colors are made for printing, giving you bright and precise colors on paper.
Always check your colors before you print anything. If you find RGB colors, switch them to CMYK for the best printing results.
Mistake 2: Incorrect Resolution
Using the wrong resolution in print can really mess things up. It’s crucial to get this correct.
Printers need pictures with high resolution. This ensures your prints are sharp and clear. Usually, they expect images between 300 and 600 dpi.
Be careful when setting the resolution for print. Always check that it falls within the range printers need. Adjust it up to the needed amount if your image is too low. Doing this ensures your prints look their best.
Mistake 3: Improper Bleed and Crop Marks
Detail is key in print production. One frequent error is not setting bleed and crop marks right. This issue can lower the print job’s quality.
Bleed means there’s extra space around your graphics. It stops white lines or borders appearing once the design is cut. Crop marks show where the design should be trimmed.
To prevent this, check your settings before you export for print. The bleed should go past the trim, usually 1/8 of an inch. Also, double-check your crop marks to make sure they’re in the right spots for cutting.